Underwater housing for mirrorless / system cameras
order code: D-B
The ewa-marine D-B underwater housing is designed for the compact MFT / Micro-Four-Thirds and other so called mirrorless SLR or CSC / Compact-System-Cameras and can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate the camera as its various components and buttons can be operated through the PVC. It actually has a special finger-"glove" that allows easy access to the shutter button and finger tip control.
With this housing, a whole new world of applications opens up for your digital camera. Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 20 m / 60 ft.
Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure (this is the reason why ewa-marine housings are so safe to use: implosions are impossible). Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" to ensure that the maximum potential volume is being utilized.
The D-B is designed for mirrorless system cameras, i.e. compact cameras with an exchangeable lens*. It is a practical, "all-round" housing that is primarily intended to be used while scuba diving, swimming, snorkeling and other, general water sports. The housing is rated to dive depths of up to 20m / 60ft. A depth where you also can still take reasonable pictures with ambient, natural light. Since underwater photography generally requires the use of wide angle or macro lenses and thus shorter lenses, the lens tubes on the housing is kept rather short.
The housing has our SF80 front port made with optical grade, hardened, mineral glass. Due to the diameter of this port, that is ideal for most MFT and Sony E-Mount that are suitable for underwater use, the maximum filter thread in this housing is 62mm.
* exchangeable lens system cameras include cameras referred to as CSC, MSC, MILC, DSLM, MFT, EVIL, Nikon 1, Canon EOS M, Fujifilm X, Samsung NX, etc.
The D-B housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The flip-up, internal flash, that can be found on some models will fit into the specially designed section on the top of the housing, allowing its use above and under water.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.
It is supplied in a handy yellow carry-case.
We recommend the use of a mounted flash for scuba diving. The D-AX housing is the perfect solution in this case.
The Samsung 1:3,5-5,6 20-50mmII lens needs the ewa-marine AV110 adapter, that does not fit into the D-B. If you have this lens, please use the slightly larger ewa-marine D-A housing.
|Depth camera body (without lens tube)
|Depth (incl. lens tubus)
|Diameter front port
|Maximum filterthread diameter
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- yellow carry-case
- manual for ewa-marine SLR-photo housings
- sachet of Camera-Dry silica-gel
- specially profiled foam padding
- ewa-marine adapters for SF80 (49, 52, 55, 58, 62mm for the respective filter threads)
Should you require a lost or broken part, please contact us via mail:
- 195/3 closing rail
- set of 3 knurled nuts for closing rail
- foam padding D-B..-Series
- SF80 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag
Pocket Cinema Camera
PowerShot G1X - requires the Canon FA-DC58C lensfilter-adapter
PowerShot G1X Mark II - requires the Canon FA-DC58C lensfilter-adapter
PowerShot G1X Mark III - requires the Canon FA-DC58C lensfilter-adapter
Powershot G7 X
PowerShot SX170 IS
Leica D-Lux 7 - requires the RA43-52 step-up ring
Leica M (Typ 240)
Leica X Vario (Typ 107)
Nikon 1 S1
Nikon 1 AW1
Nikon 1 J1
Nikon 1 J3
Nikon 1 J4
Nikon 1 S1
Nikon 1 V1
Nikon 1 V2
Nikon 1 V3
Lumix DMC-LX100 - requires the RA43-52 step-up ring
Lumix DMC-LX5 - requires the 52mm Panasonic Adapter Tube
Ricoh GR III - requires the Ricoh lens adapter GA-1
FP (depending on the lens, possibly also U-A100 housing)