ewa-marine VMW2
Underwater housing for Sony PMW200 and PMW150
order code: VMW2
The VMW2 underwater housing is the 10m/ 30ft depth housing for the Sony PMW200 XDCAM as well as the PMW150 camcorder.
The splash and underwater housing can be used on small boats, in the surf, while swimming, snorkeling or scuba diving. It`s easy to operate the camera as its various components and buttons can be operated through the PVC.
Designed specifically for the Sony PMW200 and PMW150 camcorders the VMW2 UW-housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. To allow easy operation just under the water surface, we configured the unit to operate with the monitor mounted into the top of the camera. This allows you to film under water while having your head above the surface and seeing the monitor without a diving mask.
The straps at the bottom allow weights to be attached for perfect buoyancy under water. (see accessories listed below)
Designed specifically for Sony PMW200 and PMW150 camcorders, the ewa-marine VMW2 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive an 82mm filter adapter and a RA77-82 step-up adapter. By means of these adapters the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of four screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
Overall Width | = | 12 cm | (4 3/4 inches) |
Length of floor section | = | 35 cm | (13 3/4 inches) |
Housing Height | = | 33 cm | (13 inches) |
Front Port Tubus | = | yes | |
max. Filter Diameter | = | 82 mm | |
Weight | = | 800g | (1 3/4 lbs) |
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- yellow carry-case
- manual for ewa-marine video housings
- sachet of Camera-Dry silica-gel
- foam padding
- C-A82 adapter for 82mm filter thread *
- RA77-82 step-up adapter for 77mm filter thread *
*until September 2017 this housing only included the CA77 adapter
Should you require a lost or broken part, please contact us via mail:
- 380/4 closing rail
- set of 3 knurled nuts for closing rail
- foam padding VMW2
- SF100 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag
Panasonic:
AJ-PX230 (requires an additional 72-77 reduction adapter)
AJ-PX270 (requires an additional 72-77 reduction adapter)
SONY:
PMW200
PMW150