ewa-marine A-BM2 for Blackmagic URSA mini
ewa-marine A-BM2 for Blackmagic URSA mini
ewa-marine rated to a dive depth of up to 10m / 30ft

ewa-marine A-BM2

Underwater housing for the Blackmagic URSA Mini Pro Cinema Camera

order code: A-BM2

Choose the affordable URSA Mini 4K and URSA Mini 4.6K models with cinema quality, fixed EF or PL lens mounts, and dual C-Fast card recorders. Or choose the new, advanced URSA Mini Pro 4.6K with powerful broadcast features and controls. The ewa-marine A-BM2 housing was specifically designed for all of these Blackmagic URSA Mini Pro Cinema Cameras. The housing is rated up to 10 meter depth / 33feet.

Designed specifically for these cameras the housing A-BM2 is manufactured from double laminated PVC film and has an integrated, optically neutral flat glass port and comes with special ewa-marine CA adapters for connect the lens to this port via the lense's filter thread.

The cameras side-monitor can be used inside the housing. Once the camera is installed into the housing, just release press studs of  the side flap that is integrated into the housing. And if you do not want to use it, just fold in that flap again. Some users might prefer to use a top mounted monitor as well. We have added a pouch that will accept the top mounted, standard Blackmagic Video Assist 5” all-in-one monitor or the Blackmagic Video Assist 4K 7” high resolution monitor. You might find these ideal if the lens is dipped into the water for that underwater shot while you are still able to look into the monitor above water.

Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.

It is supplied in a black carry-case.

The A-BM2 housing is currently limited to the following lens specifications:

- For lenses with a maximum length of 150mm / 6 inches

- For lenses with a maximum diameter of 100mm / 3.94 nches

- For lenses with a maximum filter diameter of 82mm

If you want to use lenses with a larger filter diameter than 82mm, ie. 95mm, please note our information for custom housings:

If you intend to use your Blackmagic Ursa mini with lenses that do not fit the above specifications above, we can supply a custom housing with a larger front port (128mm Ø). Please let us know which lens you intend to use, ideally with a link to the technical specs of the lens. We can manufacture a housing and supply it to you at short notice.

Designed specifically for the Blackmagic URSA Mini Pro (both the original version as well as the Mark II launched 2017) the housing A-BM2 is manufactured from double laminated PVC film and has an integrated, optically neutral flat glass port. With this housing you will receive a set of adapters that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of four screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

Overall Width  = 36 cm   (14 inches)
Length of floor section = 45 cm (17 2/3 inches)
Length of lens-tubus = 9 - 15 cm (3 1/2 - 6 inches)
Total length  = 54 - 60 cm (21 1/4 - 23 2/3 inches)
Housing height (without top, monitor pouch)  = 14 cm  (5 1/2 inches)
Top, monitor pouch, w/h/d = 20 / 17 / 4 cm (7.9 / 6.7 / 1.6 inches)
Front Port Tubus  = yes, long  
max. Filter Diameter  = 82 mm  
Weight  = 1,2kg (2.6 lbs)

Actually, it's not in a box at all. We sell this unit in a handy, black, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.

In Addition to your housing and closing rail you will get the following with your new ewa-marine:

  • black carry-case
  • manual for ewa-marine video housings
  • sachet of Camera-Dry silica-gel
  • foam padding
  • C-A82 adapter for 82mm filter thread
  • step-up ring RA77-82

Should you require a lost or broken part, please contact us via mail:

  • 380/4 closing rail
  • set of 3 knurled nuts for closing rail
  • SF100 front port replacement (has to be replaced in factory)
  • puncture repair (has to be repaired in factory)
  • black nylon bag

 

These products might interest you as well:


All data and pictures of underwater housings and rain capes on this site show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Some pictures shown on this website show the ewa-marine product including camera or other electronic equipment. These cameras or other electronics are not included with the product.