ewa-marine VLA2
Underwater housing for compact 3D video camcorders
order code: VLA2
The VLA2 is the 10 meter / 30 ft depth underwater housing for camcorders using the Panasonic 3D adapter.
Capture the Extreme in 3D !
Designed specifically for camcorders using the Panasonic VW-CLT1 or Panasonic VW-CLT2 3D Conversion Lens the ewa-marine VLA2 underwater housing is manufactured from a special laminated PVC and has an integrated, optically neutral flat glass port.
Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable. Even the touch screen will work with the camera in the housing.
The touch screen monitor can be operated from outside while the camera is fitted inside the underwater housing.
It has a wrist strap with a handy quick release clip to ensure it is always ready to use in and under water. But also to ensure that it is always safely connected to the operator and camera man. A pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.
Designed specifically for small, "consumer" style, digital camcorders, with the Panasonic VW-CLT1 or Panasonic VW-CLT2 3D Conversion Lens, the ewa-marine VLA2 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port.
To fixate the right hand near the power button and zoom switch, the housing has an adjustable wrist strap to position your fingers near the power and zoom switches. The strap comes with a hands quick release clip to easy handling once out ot the water
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.
It is supplied in a handy yellow storage and carrying case.
| Overall Width | = | 20,5 cm | (8 inches) |
| Length of floor section (Exluding section for Panasonic VW-CLT1 or CLT2) |
= | 15 cm | (6 inches) |
| Housing Height | = | 14 cm | (5 1/2 inches) |
| Front Port Tubus | = | yes | |
| max. Filter Diameter | = | na | |
| Weight | = | 275g | (0,6 lbs) |
Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.
In Addition to your housing and closing rail you will get the following with your new ewa-marine:
- manual for ewa-marine video housings
- initial supply of CD5
Should you require a lost or broken part, please contact us via mail:
- 230/3 closing rail
- set of 3 knurled nuts for closing rail
- SF90 front port replacement (has to be replaced in factory)
- puncture repair (has to be repaired in factory)
- yellow nylon bag, Size S
The VLA2 is a generic housing and fits all camcorders that do not exceed the following dimensions:
 |
L W+H T |
length (monitor to back) width + height width monitor and camera |
11 cm (4 1/4 inch) 12,0 cm (4 3/4 inch) 14,5 cm ( 5 1/2 inch) |
The following cameras have been checked to fit the ewa-marine VLA2 housing. Other similar sized cameras using the Panasonic VW-CLT1 or Panasonic VW-CLT2 3D Conversion Lens will fit as well:
Panasonic
HDC-SD90
HDC-SD900
HDC-TM90
HDC-TM900
HS900K