ewa-marine VEX3 underwater camera housing
ewa-marine rated to a dive depth of up to 10m / 30ft

ewa-marine VEX3

Underwater housing for compact video camcorders

order code: VEX3

The VEX3 is the 10 meter depth housing for the Sony PMW-EX3 digital XDCAM Camcorder.

Designed specifically for the PMW-EX3 camcorder the VEX3 UW-housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port.

Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.

The straps at the bottom allow weights to be attached for perfect buoyancy under water.

Designed specifically for small, "consumer" style, modern digital camcorders, with or without view finder, the ewa-marine VEX3 underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a CA-77 adapter that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

To fixate the right hand near the power button and zoom switch, the housing has an adjustable wrist strap to position your fingers near the power and zoom switches. The strap comes with a hands quick release clip to easy handling once out ot the water

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

Overall Width  =  9,5 cm  
Length of floor section  =  42 cm  
Housing Height  =  33 cm  
Front Port Tubus  =  no  
max. Filter Diameter  =  82 mm  
Weight  =  850g  

Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.

In addition to your housing and closing rail you will get the following with your new ewa-marine:

  • manual for ewa-marine video housings
  • initial supply of CD5
  • foam padding
  • CA-82 adapter for 82mm filter thread*

*until September 2017 this housing only included the CA-77 adapter

The following cameras have been checked to fit the ewa-marine VEX3 housing:

Sony
PMW-300K1
PMW-EX3

 

These products might interest you as well:

All data and pictures of underwater housings and rain capes on this site show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Some pictures shown on this website show the ewa-marine product including camera or other electronic equipment. These cameras or other electronics are not included with the product.