ewa-marine VFX
ewa-marine VFX underwater camera housing for video camcorders
ewa-marine rated to a dive depth of up to 10m / 30ft

ewa-marine VFX

Underwater camera housing for video camcorders

order code: VFX

Discontinued model / Please note: This housing is no longer in production but we do have any limited stock left in the factory. Please check with your local distributor, dealer to find out if they can still supply you.

The VFX is the 10 meter depth housing for the SONY HDR-FX1 and HVR-Z1 digital camcorders. But the newer Sony HDR-FX1000 and HVR-Z5 are a perfect fit as well.

The housing is manufactured from a special laminated PVC and has an integrated, optically neutral flat glass port.
Perfect for snorkeling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully operable.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of knurled thumb screw knobs.

The straps at the bottom allow weights to be attached for perfect buoyancy under water. Either chose normal dive weights or the weights we offer as accessories.

Designed specifically for "prosumer" style digital camcorders, the ewa-marine VFX underwater housing is manufactured from our special, double laminated PVC and has an integrated, optically neutral flat glass as a front port. With this housing you will receive a CA-72 adapter that fit the filter threads of the most popular lenses on the market today. By means of this adapter the camera is then docked into the housings front port, ensuring that the lens remains parallel and centered behind the front of the lens. Just as if it were a clear, neutral optical filter.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing.They tighten by means of three screw knobs. There is also the practical, adjustable carry strap on the clamping rail.

Overall Width  =  12 cm (4 3/4 inches)
Length of floor section  =  39 cm (15 1/3 inches)
Housing Height  =  24 cm (9 1/2 inches)
Front Port Tubus  =  no  
max. Filter Diameter  =  72 cm  
Weight  =  850g (1,9 lbs)

Actually, it's not in a box at all. We sell this unit in a handy, yellow, nylon carry bag. This bag is ideal to store and transport your ewa-marine housing, it also helps reduce unnecessary packaging-waste and as such is part of our amain to help the environment.

In Addition to your housing and closing rail you will get the following with your new ewa-marine:

  • manual for ewa-marine video housings
  • sachet of Camera-Dry silica-gel
  • foam padding
  • CA-72 adapter for 72mm filter thread

Sony
FDR-AX1
HDR-AX2000
HDR-FX1
HDR-FX1000
HVR-Z1
HVR-Z5
HXR-NX3
HXR-NX5

 

These products might interest you as well:

All data and pictures of underwater housings and rain capes on this site show the current state and design at the time when this page was last edited. ewa-marine can change and improve the design of individual products at any time during the manufacturing process. For this reason products currently available on the market may differ in some details from the pictures shown on these pages. ewa-marine reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected.
Some pictures shown on this website show the ewa-marine product including camera or other electronic equipment. These cameras or other electronics are not included with the product.